MAGNETRON SPUTTERING OF CADMIUM ONTO MOLYBDENUM
Abstract
In this paper, Mo-Cd compounds obtained by deposition in an ion-plasma installation were considered. For this purpose, a method is used for obtaining coatings with a nanocrystal structure using ion-plasma deposition of metals, followed by deposition on the substrate in the form of island films. Fundamentally new coatings based on molybdenum-cadmium Mo-Cd were obtained. For the first time, mo-Cd synthesis was obtained at a temperature not higher than 100 ° C and was carried out using the thermoflutination melting effect. The channeling effect was used to study the structure of single-crystal samples using Rutherford backscattering spectroscopy. Based on the analysis of the spectra obtained at different orientations of the ion beam in the channeling directions, it is possible to obtain information about the crystal perfection of the studied sample. From the analysis of the value of the surface peak, which is the result of a direct collision of ions with surface atoms, you can get information about the structure of the surface, for example, about the presence of rearrangements, relaxations and adsorbates on it. The experiments were performed using an x-ray diffractometer, an electron microscope, and a cryogenic unit.
About the Authors
C. A. Nurkhanov
NKSU named after M. Kozybaev
Kazakhstan
Kazakhstan
Petropavlovsk
B. M. Useinov
NKSU named after M. Kozybaev
Kazakhstan
Kazakhstan
Petropavlovsk
References
1. Benhenda S., Guglielmacci J.M., Gillet M., Hultman L., Susgren J.-E. Effect of substrate bias on the protective properties of TiN films grown by reactive magnetron sputtering onto Cu substrates// Appl. Surface Sci.-1989.-Vol.40,-№1-2.-P.121-128.
2. Тулеушев А.Ж., Володин В.Н., Тулеушев Ю.Ж., Жаканбаев Е.А. Новое соединение Ta3Pb: получение, структура и свойства. // Ядерная и радиационная физика, Матер. 4-ой Межд. конф., 15-17 Алматы, 2004г. - с.270-276.
3. Wronski C.R.M. The size dependence of the melting point of small particles of tin // Brit. J. Appl. Phys.-1967.-Vol.18, № 12.-Р.1731-1737.
4. Белый А.В., Карпенко Г.Д. Структура и методы формирования износостойких поверхностных слоев. – М.: Машиностроение, 1991.
5. Волин Э.М. Ионно-плазменные методы получения износостойких покрытий (Обзор зарубежной литературы за 1979-1983 гг.) // Технология легких сплавов.−№ 10.−1984.
6. Hill R.G., Cormia R., McLeod P. High rate magnetron sputtering// Proc. 7th Int. Vac. Congr. and 3rd Int. Conf. Solid. Surfaces, Vienna.-1977.-Vol.2,P.1583-1586.
7. Электронный ресурс – сайт производителя техники JEOL: http://jeolrus.com/products/d_products/jem-2100/index.html.
8. Johansson B.O., Sudgren J.-E., Hentzell H.T.G., Karlsson S.-E. Influence of substrate shape on TiN films preparared by reactive sputtering// Thin. Solid. Films.-1984.-Vol.111,№4.-P.313-322.
9. Stowell M.J. The Solid-Liquid Interfacial Free Energy of Lead from Supercooling Data // Phil. Mag.- 1970.-Vol.22, №176.-Р.1-6.
10. Жаканбаев Е.А., Тулеушев Ю.Ж. Исследование влияния параметров магнетронного осаждения на сверхпроводящие свойства пленок нитрида ниобия// Тез. 7 межд.конф. «Ядерная и радиационная физика».-Алматы, 2007.-С.102-104.
Review
For citations:
Nurkhanov C.A., Useinov B.M. MAGNETRON SPUTTERING OF CADMIUM ONTO MOLYBDENUM. Vestnik of M. Kozybayev North Kazakhstan University. 2020;(1 (46)):12-18.
Views:
228
Email this article 
